News

　　X-ray machine comprehensive testerAs the guardian of medical diagnostic equipment, it plays an irreplaceable role in ensuring the performance and safety of X-ray machines. Through high-precision measurement and multi-dimensional testing functions, it can not only help medical institutions improve equipment usage efficiency and diagnostic accuracy, but also provide patients with safer and more reliable medical services.
 

　　The following are the maintenance methods of the X-ray machine comprehensive tester:
 

　　-Cleaning and Disinfection: Keep the outside of the device clean, use a soft cloth to wipe the case, and avoid using corrosive or abrasive cleaners. Disinfect touch screens and operating parts regularly.
 

　　- Check the cables and connecting parts: Make sure that the high-voltage cables, low-voltage cables and cooling oil pipes are not damaged or leaking. If damaged, replace or repair them in time.
 

　　-Power supply and console check: Check whether the device's power supply, console and connecting cables are intact, and make sure the power supply is stable.
 

　　- Calibration and Inspection: Calibration and quality control tests are performed regularly to ensure the accuracy and consistency of X-ray radiation. Check the stability of the detector and light source and replace or repair if necessary.
 

　　-Safety system inspection: Regularly check the safety system of the X-ray machine to ensure radiation safety. Check that radiation barriers and protective equipment are intact to prevent radiation leakage.
 

　　- Lubrication and renewal: Clean the high-voltage cable plugs and sockets every six months, remove the hardened silicone grease, and re-apply new silicone grease and plug them in. Programmed training is performed when the machine is shut down for a long time to achieve the purpose of automatically training the X-ray tube.
 

　　- Transformer insulating oil inspection: The strength of the transformer insulating oil in the high-voltage transformer is tested every two years, and the oil is required to be dried or replaced.
 

　　- Reasonably set parameters: According to the actual situation of the unit, reasonably set the upper and lower temperature limits of the oil tank outlet pipe to form automatic temperature control.
 

　　-Troubleshooting: When a fault occurs, find the fault point according to the fault code and eliminate it. If you cannot solve it by yourself, you need to report it for repair.
 

　　-Regular startup: If the equipment is restarted after being out of service for a long time, the X-ray tube needs to gradually generate X-rays from small conditions to large conditions to reduce the possibility of damage to the inverter drive circuit board, high-voltage generator and X-ray tube.
 

　　-X-ray machine comprehensive testerRegular maintenance should be performed: When parked for a long time, maintenance should be performed every three months.