PRIMALERT® Digital Area Radiation Monitor
Product model:
Brief description:PRIMALERT digital radiation area monitor is a monitor designed for wide-range gamma radiation area monitoring applications.
Manufacturer strength
Manufacturer Strength
Valid warranty
Valid Warranty
Quality assurance
Quality Assurance
Product consultation
ContactProducts
PRODUCT CATEGORYRadiological imaging quality control equipment
American RSD phantomCRDR machine detection toolCT detection toolsDental machine testing toolsBreast testing kitDSA performance testing toolRadiotherapy and Nuclear Medicine TestingX-ray machine multifunctional quality detectorConventional X-ray photography inspection phantomUltrasound diagnostic quality control testing phantomMultifunctional dose area product meterMagnetic Resonance Machine Testing Toolsbone density phantomSimulation phantomsolid waterSensitometers and Densitometersluminance meterPortable Radioisotope Identification Device (RIID)
Detective-200 rugged, ultra-high sensitivity, portable HPGe radionuclide identification systemRADEAGLE-Cx high sensitivity, high adaptability detection unit, suitable for diversified radiation detection and nuclide identification applicationsRADEAGLET-R Rugged, lightweight, handheld radionuclide identification deviceRADEAGLE, the handheld radioisotope identification instrumentDetective-100T HPGe-based handheld radioisotope identifierMicro-Detective Ultralight Portable Handheld Radioisotope IdentifierDetective X ultra-high resolution HPGe radioisotope identification deviceDetective DX1 is a new generation, ultra-high-resolution and high-purity germanium nuclide identification instrument.Micro-Detective-HX Advanced Handheld Radiation Detection and Identification RIID- Counters, timers, rate meters and multi-channel scalers (MCS)Digital current integratoramplifierCables and accessoriespreamplifierpulse generatormulti-channel analyzerSingle channel analyzerDelays, Gates and Delay Generators, Logic Blocks and Linear GatesFast timing discriminatorTime-to-amplitude converters and calibratorsHV Bias/NIM Power Supplies and Power EnclosuresPhotomultiplier tube (PMT) base
- timing systemGammaScreen-8 Total Gamma Screen Counterα/β counterStandFAST II Standing Full Body CounterOnline monitoring systemOS1700 Tritium AdopterCompton suppression counting systemPINS3-CF Chemicals and Explosives Identification SystemCustomized systemwaste analysis systemchemical identificationnuclear safeguardshealth physics systemfood monitoring system
- FRAM plutonium and uranium isotope analysisMGA++ γ-ray isotope ratio actinide analysisNuclide Navigation-Pro, interactive nuclide map, reference softwareRenaissance whole body counter softwareANGLE advanced gamma spectrum measurement efficiency calibration softwareAlphaVision alpha spectrum measurement softwareDataMaster spectrum file format converterGammaVision gamma spectrum analysis softwareGammaVision Report GeneratorGlobal Value Productivity Suite by GammaVisionISOTOPIC gamma spectroscopy waste determinationMAESTRO Multichannel Analyzer SimulationMAESTRO-Pro Advanced Spectrum SoftwareCONNECTIONS Programmer's Toolkit
Related articles
RELATED ARTICLES
Detailed introduction
PRIMALERT® Digital Area Radiation Monitor
PRIMALERTDigital radiation area monitors are designed for wide rangeA monitor designed for gamma radiation area monitoring applications. Two independent configurations are available, both equipped with energy compensationGMdetector(The data in parentheses indicates its detection range)：05-443 (0.1 mR/hto1 R/h) and05-444 (1 mR/hto4 R/h). Both models are powered by AC power, have a built-in backup battery pack, and feature user-adjustable low/High alarm. For added safety, an optional remote alarm feature is also available.
multifunctionalPRIMALERTDigital radiation area monitors can be used in industrial applications, medical settings or those where there is a need to notify workers and staff when radiation levels are increasing./or need to limitApplication of cumulative radiation dose to workers by gamma rays.
Technical indicators
| Intended use | Radiation area monitoring |
| internalGMDetector range | 05-443:0.1 mR/hrtoR/hr；05-444：1 mR/hrto4 R/hr |
| show | 4BitLEDDisplay screen, character height:2 cm (0.8 in);Display range:000.0to9999 |
| Display unit | can be displayed asμR/hr、mR/hr、R/h、μSv/h、mSv/h、Sv/h、cpm、cps and other units |
| linearity | When the probe is connected, the reading range is within the true value± 10%within range |
| response | from the final reading of10%Arrive90%Typical time is3seconds |
| Status(green light) | Indicates that the instrument is in normal working condition |
| low alarm | Yellow indicator light and low frequency(1times/seconds)beep(Can be set to0.0to9999any value between) |
| high alarm | Red indicator light and high frequency(4times/seconds)beep(Can be set to0.0to9999any value between) |
| Detector failure | Red indicator light and audio; on2 ftlarger than68 dBIndicates that the probe is overloaded and cannot be removed from the probe. Obtain data, or instrument failure |
| low battery(yellow) | Indicates that the remaining battery power is available for less than2hours |
| Calibration control | The instrument can be operated via its front panel(Provide protective cover) |
| high pressure | 200 Vto2500 VAdjustable |
| threshold | 2 mVto100 mVAdjustable |
| dead time | Adjustable to compensate for probe and electronics dead time(Can be read from the screen) |
| overload | Induction detector saturation(on the display with“-OL"means) |
| Over range | Indicates that the measured radiation field exceeds the counting range of the instrument.(on the display with“ "means) |
| data output | 9pin connectors provided5A decade of logarithmic output,RS-232output, signal ground connection, Fault and alarm signals(sink current), and connect directly to battery and ground. |
| Power requirements | 95 V acto135 V ac (provide178 V acto240 V ac)，50 Hzto60 HzSingle item(< 100 mA)，6 VSealed lead-acid rechargeable battery(Built-in) |
| battery life | The typical value in non-alarm state is48hours, the typical value in alarm state is12hours |
| battery charger | When the instrument is connected to power and turned on, the battery undergoes a continuous trickle charge |
| Shell material | Aluminum housing, white polyurethane enamel paint |
| temperature range | -20℃ to50℃(-4°Fto122°F).-40℃ to65℃(-40°Fto150°F)Guaranteed within the range work. |
| Size(widexdeepxhigh) | 24.6 cm x 6.4 cm x 18.7 cm (9.7 in x 2.5 in x 7.4 in) |
| weight | 2.3 kg (6.5 lb) |
NOTE: The audio indicator can be set to a single beep if desired.
Product consultation
- Previous article:Bleeper mR Pager Radiation Monitor
- Next article:ProSim 8 Vital Signs Simulator
