DSPEC Pro digital signal processing gamma ray spectrometer
View product
Product model: Brief description: DSPECPro’s versatility (such as numerous functions and operating modes) means it is the ideal solution for a variety of applications
Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
107 products
DSPEC jr 2.0 digital signal processing gamma ray spectrometer
View product
Product model: Brief description: Innovative ZDT non-destructive counting correction
DSPEC LF digital signal processing gamma ray spectrometer
View product
Product Model: Brief Description: Full-featured digital spectrometer for HPGe and NaI detectors Automatically optimized for detector performance() ORTECSMART-1 smart HPGe support Continuous display of detector status and health information Fast data transfer for real-time spectrum display Easy to install
566 time amplitude converter
View product
Product model: Brief description: Suitable for time spectrum analysis in the range of 10ns to 2ms Active start and active transition output Selectable output delay and width Output synchronized with stop or external strobe signal Can reject unwanted start input signal Positive and negative input signal ORTEC566 time amplitude converter (TAC) can measure the time interval between start and stop input pulses
567 Time Amplitude Converter/SCA
View product
Product model: Brief description: Suitable for time spectrum analysis in the range of 10ns to 2ms, including SCA
499 Fast/Slow NIM Logic Converter
View product
Product Model: Brief Description: Eliminates erroneous logic problems in counting and fast timing experiments
Time-to-amplitude converters and calibrators
View product
Product Model: Brief Description: The Time Amplitude Converter (TAC) achieves unprecedented accuracy by using analog technology to convert small time intervals into pulse amplitudes.
925-SCINT ACE Mate preamps, amplifiers, bias supplies and SCA
View product
Product Model: Brief Description: Standalone instrument designed for benchtop operation Connects directly to photomultiplier tube sockets (such as models 266, 276 and 296) Protects against sudden positive or negative high voltage spikes Amplifier has a 10 volt linear output
439 digital current integrator
View product
Product model: Brief description: Measures the average value of DC or pulse current. Can be used as a digital current integrator, digital charge integrator or digital electrometer. Wide dynamic range. Input is protected to 1000V (0.01F) or 2000V (0.001F). The ORTEC439 digital current integrator is designed to accurately measure the average value of DC current or pulse current generated by an accelerator beam.
4006 mini case and power supply
View product
Product model: Brief description: Can accommodate up to 6 NIM standard modules
4001A and 4001C NIM Chassis
View product
Product Model: Brief Description: 4001A and 4001C NIM Chassis
4002A 96-W power supply for NIM chassis
View product
Product model: Brief description: 12V@2A and 24V@1.0A regulated DC power
4002D 160-W power supply for NIM chassis
View product
Product model: Brief description: 6V@10A, 12V@3A and 24V@1.5A regulated DC power
4002E BLACK MAX power supply for NIM chassis
View product
Product model: Brief description: Can provide higher power regulated DC power of 6V@12A, 12V@4A and 24V@2A for high-density NIM
HV Bias/NIM Power Supplies and Power Enclosures
View product
Product Model: Brief Description: ORTEC offers two types of power supplies for NIM instruments: a power supply that provides the operating voltage for the detector (more appropriately called a detector bias power supply or HV power supply) and a power supply that provides the necessary operating voltage for the NIM modular electronic instruments in the form of a NIM power supply chassis with associated power supplies.
449/449-2 Log/Lin Count Rate Table
View product
Product Model: Brief Description: Linear and logarithmic modes 10 to 106 counts/second range Logarithmic range with 5 decimal digits 0 to 100% zero rejection Positive or negative input (50ns minimum width) Wide selection of time constants Optional audio output The Model 449 Log/Lin Count Rate Meter from Per Second is available in two modes of operation: Linear and Logarithmic
928 EASY-NIM multi-function MCA/counter/timer/count rate meter
View product
Product Model: Brief Description: High Performance, Multi-Function MCA/Counter/Timer/Count Rate Meter in Single-Wide NIM 200MHz Counter Performance
996 CCNIM timers and counters
View product
Product model: Brief description: 100MHz
994 Dual Counter and Timer
View product
Product model: Brief description: Two 8-bit decimal counters and a timer
871 timers and counters
View product
Product Model: Brief Description: 8-digit decimal presettable timer and counter 25MHz positive or negative input count rate Crystal controlled clock Automatic recycle time control The ORTEC Model 871 is a non-printing timer and counter that can be used in any system as a counter and presettable timer, timer and presettable counter, or as two counters