KARRAY / PRODUCT DETAILS

American TISCH PM10 da flow sampler

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

American TISCH PM10 da flow sampler image

American TISCH PM10 da flow sampler

Product model:

Brief description: Mass flow control respirable particulate system  Includes size selectable inlet, anodized aluminum housing, 8" x 10" probe hole, blower motor assembly, continuous flow/pressure recorder  Combined mass flow controller w/20-60 SCFM air stainless steel filter holder flow probe

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Related articles

RELATED ARTICLES

Detailed introduction

 USATISCH PM10 da flow sampler

Product introduction:

l Mass flow control respirable particulate matter system

l Includes size selection entrance, anodized aluminum housing,8" x 10" probe hole, blower motor assembly, continuous flow/pressure recorder

l Combined with mass flow controllerw/20-60 SCFM Air Stainless Steel Filter Holder Flow Probe

l time indicator,30" water pressure gauge, filter media holder/filter paper cassette, (8×10), complete system

l TE-6070 high-flow particulate matter sampler, collects ambient air PM10, PM2.5 or TSP

l Provides a very flexible sampling platform with multiple options for different users

Product features:

l Automatic calibration

l Stable flow rate 99%  

l Microprocessor-based control unit instantly adjusts flow to user-specified orEPA standard conditions,

l Continuously collect data, average values of temperature, air pressure, flow rate,*Minimum and maximum values.

l supportSD card

l everyAutomatically records temperature, air pressure and flow rate in 5 minutes to maintain stable flow

l The status indicator provides an alarm function, such as recalibration is needed, etc.

l withCompatible with EPA recommended sample cartridges

l CompatibleEPA Standard, EPA 40 CFR 50, Appendix B

l No need to buy expensive electronic scales for weighing

l UseVenturi flow control device produced by TISCH for sample flow measurement

l Use directlym3/min unit, in line with US EPA2.5 data reporting requirements

l The PM2.5 sampling head uses the same quality assurance sampling procedures as the existing PM10

l Sampling methods remain basically unchanged and technical staff do not need to be retrained.

Technical parameters:

product specifications


Intake dust removal efficiency

USEPA Reference MethodRFPS-0202-141

flow rate

40 cubic feet (1.13m³) continuous

filter media

Micro quartz filter material8" x 10" for respirable particulate matter (TE-QMA)

flow control

VFC(TE-10557PM10)

Motor fan

Level 2 Motor 1.0 HP 110V/60HZ (TE-115923)

water pressure gauge

30" Water Pressure Gauge (TE-5030)

flow indicator

traffic/Pressure Recorder (TE-5009 with Chart (TE-106)

elapsed time indicator device

Solid state electronic timer programming with digital elapsed indicator (TE-302)

Altitude application

Arrive10,000 feet elevation

Ambient temperature application range

-30 to +50ºC

Relative humidity applications

0 - 100%

Sampling delay start range

0 - 7 days

Starting current

20 amps

Running Ampere

7 amps

Size

45.5" x 22.5" x 20" / 50 lbs 32" x 32" x 25.5" / 56 lbs 28" x 21" x 10" / 19 lbs

Motor product specifications

110V/60HZ€" Part Number TE-115923


220V/50HZ€"Part No. TE-116111, Level 2, Ball/Oil Bearing Through-Flow Discharge

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.