KARRAY / PRODUCT DETAILS

ISO-TURNTABLE rotating platform

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

ISO-TURNTABLE rotating platform image

ISO-TURNTABLE rotating platform

Product model:

Brief description:Most waste measurements are made under non-uniform conditions, which reduces measurement accuracy if the activity is not evenly distributed throughout the cartridge.

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Detailed introduction

ORTEC Model ISO-TURNTABLE for Radioactive Waste Drum Rotation
Most waste measurements are made under non-uniform conditions, which reduces measurement accuracy if the activity is not evenly distributed throughout the cartridge. Rotating the barrel makes the item "look" more even to the detector. Uncertainty in matrix attenuation can be reduced using the Isotopic program. Therefore, the reported results reflect an improvement (reduction) in the overall measurement uncertainty.

The drum requires a forklift or hand truck to safely position it in the center of the platform. The height of the platform is 6.5 inches above the floor. No additional electronic noise is introduced in HPGe detector signal processing.

  • Fits 55 or 85 gallon drums
  • 30-inch diameter turntable
  • 22 x 22 inches support base
  • 1000 lb (454 kg) load capacity
  • 1 RPM speed
  • Shipping weight: 200 lbs.
  • information +

    • Download link ISO-TURNTABLE brochure
    • Download link ISO-TURNTABLE Brochure (A4)
  • Ordering information +


    Model

    Description

    ISO-TURNTABLE-110

    110 V,60 Hz. Full load current0.46Ampere.

    ISO-TURNTABLE-240

    240 V,50 Hz。

    Optional accessories

    ISO-TURNTABLE-OPT1-2

    from1 RPMincrease to2 RPM

    ISO-TURNTABLE-OPT1-3

    from1 RPMincrease to3 RPM

    ISO-TURNTABLE-OPT2

    Wireless on/close

    ISO-TURNTABLE-OPT3

    power extension cord

    ISO-TURNTABLE-OPT4

    switch cable extension

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.