Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
229 products
View product
Product model: Brief description: Host serial number: VD0201747 complies with IEC 61674 standards and can be used for acceptance testing and quality control of general X-ray photography and fluoroscopy, dental and mammography equipment. It can simultaneously measure the following: Dose Dose rate Exposure time
View product
Product model: Brief description: 1. Minimum resolution size of simulated arterial blood vessels and motion artifact detection module sculpting agent concentration: one piece each of 150mg/mL and 1300mg/mL, three simulated blood vessels, with width and thickness of 1.0, 2.0 and 4.0mm respectively. Each tube has simulated arterial stenosis and aneurysm. The widths are 1/4, 1/2 and 3/4 of the width of a single artery respectively. The module size is 300*150*25.4mm, as shown in the figure 2. Low-contrast iodine line pair test plug-in
View product
Product model: Brief description: This set of phantoms is designed to detect the dynamic range, spatial resolution, low contrast linearity, subtraction performance, blood vessel detail imaging performance, geometric distortion and other performance indicators of the DSA system. The unique walking mechanism designed by this phantom can realize semi-automatic module subtraction function. The operator can squeeze the air bag from a safe distance to push the plug-in module to walk in the irradiation field through remote control operation to achieve subtraction, thus effectively reducing the operator's exposure to radiation.
View product
Product model: Brief description: 1.DSA performance testing phantom is used for quality assurance of digital subtraction angiography equipment. It can detect dynamic range, contrast sensitivity, nonlinear attenuation compensation (logarithmic error) and artifacts (subtraction performance response). 2.7-level wedge-shaped copper ladder for testing the dynamic range: 7 linear copper ladders with a thickness of 0.2-1.4mm, arranged vertically with the vascular simulation board plug-in, and another set of copper ladders with a thickness of 1.4mm-0.2mm for logarithmic compensation testing.
View product
Product model: Brief description: German IBA DSA testing phantom RöVi-8 acceptance testing follows IEC 61223-3-3, DIN 6868-54 routine testing follows DIN 6868-8Specially designed for DSA detectionIf your X-ray machine has a digital subtraction angiography (DSA) function, in order to ensure the normal operation of the machine, it is not enough to just conduct fluoroscopic inspections. What you need more is the detection of DSA special parameters.
View product
Product model: Brief description: DSA detection phantom, specially designed for DSA detection. If your X-ray machine has a digital subtraction angiography (DSA) function, in order to ensure the normal operation of the machine, it is not enough to just conduct fluoroscopic inspections. What you need more is the detection of DSA special parameters. With the help of the DSA-8 test phantom, you can quickly and easily complete various DSA testing items required by international standards. When scanning, please manually press the airbag to drive the blood vessel simulation board to simulate the real condition of blood vessels.
View product
Product model: Brief description: DSA performance testing phantom is used for quality assurance of digital subtraction angiography equipment. It can detect dynamic range, contrast sensitivity, nonlinear attenuation compensation (logarithmic error) and artifacts (subtraction performance response).
View product
Product model: Brief description: Software used to evaluate the organ dose and effective dose of patients' sensitive organs (gonadal organs, etc.) in various clinical models of single-slice and multi-slice spiral CT scans; the software is designed based on the calculation method of Monte Carlo dose values under the standard phantom (Adam and Eve).
View product
Product model: Brief description: The 3DQA phantom is a high-precision quality control phantom (the tolerance is 0.1mm in the effective evaluation area). 3D three-dimensional phantoms can be widely used in radiation oncology, three-dimensional radiosurgery, clinical radiation treatment planning and quality control of CT simulators. It can simulate a person very realistically for imaging, treatment planning, and treatment.
View product
Product model: Brief description: KR116 Heart tissue phantom Serial number: VD0403520 Product introduction Heart tissue phantom Serial number: VD0403520 Used together with anthropomorphic chest phantom. Optional phantom with drilled holes (for center point CTDI measurement)
View product
Product model: Brief description: KR114 Anthropomorphic chest phantom expansion ring Product introduction The expansion ring is an accessory for the anthropomorphic chest phantom, used to simulate patients with different body thicknesses, and is available in medium and large sizes.
View product
Product model: Brief description: Anthropomorphic chest phantom including carrying case Serial number: VD0403510 The phantom is composed of artificial lungs, air and spine-equivalent tissue surrounded by soft tissue.
View product
Product model: Brief description: This phantom is used to evaluate the slice sensitivity distribution (SSP) of spiral CT scanners. It consists of 25 tiny tungsten metal pieces embedded in a cylindrical plastic material that is comparable to the uniform tissue of the human body.
View product
Product Model: Brief Description: Electron density detection phantom improves the accuracy of your treatment plan. The phantom can accurately convert CT values obtained through measurement into electron density. The phantom includes reference modules for eight different human tissues. At the same time, the phantom has a reserved module, which can be used to inject different liquids you need.
View product
Product model: Brief description: Electron density phantom VD0403670 for use with the anthropomorphic chest phantom. The phantom consists of a solid plastic cylinder, which contains 6 cylinders of materials with different electron densities (air, solid water-tissue, dense tissue, cancellous bone, medium-density bone, and dense bone).
View product
Product model: KR109 Brief description: The spatial resolution test card is used to evaluate the spatial resolution capability of a CT scanner in the X-Y plane and Z-X plane.
View product
Product model: Brief description: Product introduction Use with anthropomorphic chest phantom. Designed for evaluation of imaging performance of CT scanners in the X-Y plane and Z-X plane. There are two models of low contrast resolution phantoms: 10 HU VD0403650 20 HU VD0403660
View product
Product model: Brief description: Used for detecting the CT value, noise, uniformity and layer thickness of water in spiral CT scanners. It can be used in combination with some special phantoms for stability testing provided by CT scanner manufacturers.
View product
Product model: Brief description: 1. Detect CT spatial uniformity (noise). 2. Made of tissue-equivalent materials, filled with pure water when in use. Used to measure the CT value of the CT machine. When using, the water phantom should be placed on the bracket so that it is perpendicular to the beam.
View product
Product model: Brief description: The solid water phantom is fast and simple, and can replace the traditional water tank for routine detection of linear accelerator photon beams. The unique product characteristics allow each Water to be tested for water equivalence in an independent calibration laboratory before being put into use. The phantom pieces produced from this special material are strong enough and will not stick together when stacked and stored. Changes in temperature and humidity have no effect on the water. A cavity sheet design that accommodates parallel plate ionization chambers or finger ionization chambers.
