KARRAY / PRODUCT DETAILS

LB 124 B Surface Contamination Meter

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

LB 124 B Surface Contamination Meter image

LB 124 B Surface Contamination Meter

Product model:

Brief description:Contamination monitor LB124B is a versatile and flexible tool based on well-proven practical radiation protection filled xenon proportional counter technology Can be used to encounter any contamination caused by radioactive substances and has to be monitored LB 124B has a high sensitivity to beta particles and gamma It is particularly suitable for measuring the photons of radionuclides

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Related articles

RELATED ARTICLES

Detailed introduction

germanyBERTHOLD LB 124 B Surface Contamination Meter

Product introduction:

l pollution monitorThe LB124B filled xenon proportional counter technology is a versatile and flexible tool based on practical radiation protection.

l Can be used to encounter contamination caused by any radioactive material and have to be monitored

l LB 124 B has a high sensitivity to beta particles and gamma It is particularly suitable for measuring photons of radionuclides

l The measurement of radioactive contamination on surfaces with the beta-gamma contamination monitor LB 124 B is based on the proven xenon-filled proportional counter technology

l This detection technology provides the highest sensitivity

l Ideal for measuring photon radionuclides widely used in nuclear medicine, as well as in other laboratories and environments

l pollution monitorLB124B is a portable battery powered instrument with a sensitive area of 150 cm2

l It consists of a sealed xenon-filled proportional counter tube, a microprocessor board with display unit, and an amplifier and discriminator module for signal processing with a high-voltage power supply.

l For better detection protection with guides install an additional light grid or use a sample holder with drawer for small sample measurement activities

l The LB 124 B has an attractive and ergonomic design and due to its low weight it is easy to handle

l Even under adverse conditions, measurement results can be easily read on the large-screen high-resolution display with background illumination

Features:

l Light weight, easy to handle and sturdy instrument

l wide temperature range

l simultaneously independentZnS(Ag) α and β-γ contamination measurement detectors

l High sensitivity and uniform response

l No gas required for calculation

l Dose rate detection

l The front side of the detector instrument is positioned parallel to

l The energy response isH* (10) surrounding dose equivalent

l Halogen quenched Geiger - Miller tube

l Dynamic range:0.1 microsievert/hour to 20 millisievert/hour

l Energy range:50 keV to 1.3 MeV

l Alarm threshold dose rate measurement

l Select units: Microsievert/hour

l Dose accumulation is possible

Technical parameters:

show

monochromeLCD 192 x 64 pixels

electroluminescent lighting

detector

Zinc sulfide (silver) scintillator

Light detection

Photomultiplier tube ( PMT )

Measurement mode

α- and β-γ measurements, simultaneous and independent measurement modes, tachometer, scaler timer mode, gap measurement, half-life measurement, measurement mode

Entrance window size

118mm x 145mm

sensitive area

170 square centimeters

Metal material of entrance window

2 x 3 micron plastic metallization (0.4 mg/cm²)

protective grid

80% transmission

Overall dimensions

240mm x 140mm x 110mm (length x width x height)

weight

1400g (including battery)

Alarm

Alarm sound alarm threshold is adjustable

data storage

1000 date and time measurements

serial interface

RS232

power supply

3 x C-size batteries LR14 alkaline 1.5 V or NiMH (HR-14) batteries 1.2 V, rechargeable via plug-in power supply, or wall mount bracket

Working hours (no lighting)

Alkaline batteries:> 50 hours

NiMH battery:> 25 hours

temperature range

-20°C to +40°C (operation)

-40°C to +60°C (storage)

relative humidity

0% to 80% (no condensation)

external pressure

500 to 1300 hPa (operating)

100 to 1300 hPa (storage/transportation)

Protection level

IP64 (according to IEC60529)

Contamination Monitor

LB 124 B

36516-10

Test source

200 Bq 90Sr

41872

Aluminum alloy shell

LB 124-KB

38164

power supply

Multirange

58067

wall mount bracket

for LB 124 SCINT

38789

Additional protection for the grid

for LB 124 SCINT

45355

data cable

D-Sub cable 3 m

26204

rechargeable battery

3 x NiMH 1.2V/4.5 AH

40650

floor trolley

for LB 124 SCINT

41028

Sample rack, drawer

for LB 124 SCINT

40927

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.