KARRAY / PRODUCT DETAILS

Cables and accessories

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

Cables and accessories image

Cables and accessories

Product model:

Brief description:Blank NIM Modules - Models 400A, 400B and 400C + ORTEC offers blank modules in three standard NIM widths

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Detailed introduction

  • Blank NIM Modules - Models 400A, 400B and 400C +


    ORTECThree standards availableNIMWidth of blank module, single width (400A), double wide (400B) and three widths (400C), providing experimenters with different package designs for specialized electronic equipment in standard configurations. Blank modules are factory assembled and each module comes with10connector pins, pins pre-wired25.4cm (10in.) leads for integration with experimental electronics. ORTEC 400A 400B 400C Blank NIM Modules
  • Blank NIM Panels - Models 400-1B, 400-2B and 400-3B +


    ORTECThree standards availableNIMwidth of the blank panel, respectively single width (400-1B), double wide (400-2B) and three widths (400-3B)。 ORTEC 400-1B 400-2B 400-3B Blank NIM Panels 
  • Magnetic Shield - Model 218 +


    It is recommended that magnetic shields be used with photomultiplier tubes to reduce interference from the Earth's magnetic field or the magnetic fields of other devices. Model218used for2inch diameter photomultiplier tubes andORTEC 265Type tube holder. Model218The nominal length is12.7cm (5inches), the outer diameter is7.6cm (3inches). ORTEC Model 218 Magnetic Shield for for Model 265A Photomultiplier Tube (PMT) Base 
  • Signal Splitter - Model MT050 +


    One input provides two equal half-amplitude outputs, still retaining50Ω termination; reflection, typically10% (DC to exceed500 MHzequivalent bandwidth); rise time,1 ns;Continuous input power,1 W。 ORTEC MT050 Matched Tee Signal Splitter
  • Cable assemblies and bulk cables +


    C-18-0 Microdot 100Ω cable with twoMicrodotmale plug,5cm (2inches) long

    C-18-2 Microdot 100Ω cable with twoMicrodotmale plug,0.61meters(2feet) long
    C-19-2 Microdot 100Ω cable, with aBNCmale plug and aMicrodotmale plug,0.61meters(2feet) long

    C-21 Microdot 293-3913 100Ω cable, length specified

    BNCplug - RG-62A/U(93Ω) - BNCplug.

    C-24-1/2 15cm,6inches long

    C-24-1 30cm,1feet long

    C-24-2 0.61meters,2feet long

    C-24-4 1.2meters,4feet long

    C-24-8 2.4meters,8feet long

    C-24-12 3.7meters,12feet long 
     

    BNCplug - RG-58A/U(50Ω) - BNCplug.

    C-25-1 30cm,1feet long

    C-25-2 0.61meters,2feet long

    C-25-4 1.2meters,4feet long

    C-25-8 2.4meters,8feet long

    C-25-12 3.7meters,12feet long

     
    C-34-12  RG-59B/U 75-Ω cable, with aSHVfemale plug and aMHVmale plug,3.7meters(12feet) long. 

    C-36-2  RG-59B/U 75-Ω cable with twoSHVfemale plug,0.61meters(2feet) long

    C-36-12  RG-59B/U 75-Ω cable with twoSHVfemale plug,3.7meters(12feet) long
    C-75  RS-232-CCable, female to female,3meters long.
    C-80  RS-232-CExtension cable, male to female,3meters long.
    401-C3  module extension cable,0.91meters(3feet) long.
    C-VT120  used forVT120A/B/Cpower cord assembly,3meters long.
    121-C1  Preamplifier power extension cable,3meters(10feet) long. male to female 9needleDtype connector.
    4002P-C1  Preamplifier power cable.
     

    C-488-2 IEEE-488interface cable,2meters long.

    C-488-4 IEEE-488interface cable,4meters long. 
     

    PRN-C-2  Printer port cable, male to female,25core; core0.61meters(2feet) long.

    PRN-C-10  Printer port cable, male to female,25core; core3meters(10feet) long.
     

    LL174Signal cable RG-174 50-Ω cable with twoLEMOMale plug.

    LL174-0   0.1meters long

    LL174-1   0.25meters long

    LL174-2   0.5meters long

    LL174-3   1meters long

    LL174-4   2meters long 
     

    SMA58 RG-58A/U(50Ω) coaxial cable withSMAconnector

    SMA58-0.15 0.15meters long

    SMA58-0.5 0.5meters long

    SMA58-1.5 1.5meters long
     
  • Custom cable assemblies +


    Replace in the model number with the desired length in feetX, the following custom cables can be ordered. For example, if you want to order25feet longC-18-X-SCable, please specify on orderC-18-25-S。(1meters= 3.28feet)

    C-18-X-S  Microdot 100-Ω Cable, comes with twoMicrodotplug. 
    C-19-X-S  Microdot 100-Ω Cable, bring oneMicrodotmale plug and aBNCMale plug.
    C-24-X-S RG-62A/U 93-Ω cable with twoBNCMale plug.
    C-25-X-S RG-58A/U 50-Ω cable with twoBNCMale plug.
    C-34-X-S RG-59B/U 75-Ω cable, with aSHVfemale plug and aMHVMale plug.
    C-36-X-S RG-59B/U 75-Ω cable with twoSHVFemale plug.
    C-43-X-S   RG-59B/U 75-Ω cable, with aSHVfemale plug and an open end.
    C-45-X-S RG-62A/U 93-Ω cable, with aSHVfemale plug and aBNCmale plug; will807type vacuum chamber connected to142AH、142IHand142PCtype preamplifier.
    121-C1-X-S Preamplifier power extension cable.
    401-C3-X-S    Module extension cable.
  • terminal +



    TF50  feedthrough terminal block,50Ω,BNC. Provided on high impedance input50Ω cable50Ω(±2%)1 WFeedthrough terminal.

    SMA50  terminal,50Ω,SMA(male head).


    T50  terminal,50Ω,BNC. provide high quality50Ω(±1%)1/2-WTerminal.


    C-27  terminal,100Ω,BNCMale plug.

    C-28  terminal,50Ω,BNCMale plug.
     
     
    LT050  terminal,50Ω,LEMO。

  • adapter +


    ORTEC C-16 Microdot to BNC Adapter
    C-16male headMicrodotto female headBNC 
     
    ORTEC C-17 BNC to Microdot Adapter
    C-17male headBNCto female headMicrodot

    C-29 BNCtee connector

    C-30female headMicrodotto female headMicrodot
    ORTEC C-31 Male BNC to Male Microdot Connector
    C-31male headBNCTurn male headMicrodot
    ORTEC C-46 SHV Tee Connector
    C-46 SHVtee connector
    ORTEC C-62 Female BNC to Female BNC Connector
    C-62female headBNCto female headBNC
    ORTEC C-63 Male SHV to Male SHV connector
    C-63male headSHVTurn male headSHV

    BL050male headBNCto female headLEMO

    BNC/SMAmale headBNCto female headSMA

    IT100pulse inverter for50Ω system. Small distortion, good linearity, no overload effect,0.8 nsrise time capability and100 nswithin7% tilt.

    LB050male headLEMOto female headBNC

    SMA/BNCmale headSMAto female headBNC
    ORTEC TA050 LEMO Tee Adapter
    TA050 LEMOtee adapter
     
  • Bulkhead mounted jack +



    C-13 BNCturnMicrodotVacuum, with female connectorBNCHe GongtouMicrodot 
     

    C-38 SHVMale bulkhead jack
  • plug +



    C-22used for100Ω cableMicrodotMale plug 

    C-37 SHVFemale plug
  • Tools +



    C-23used forC-21andC-22 Microdot T32-11assembly tools
  • USB connection +


    DPM-USBdual port memory toUSBconverter
    Since the advent of the personal computer,ORTEClaunchedMCB,It connects to the computer via a flat ribbon cableISAcard.ISA(industry standard architecture) bus is now almost extinct. Today's modern computers typically do not have empty slots of any kind, but doUSBport. asCONNECTIONSAn enhanced version of the product range,DPM-USBThe interface provides a way toORTECDual port memory (DPM) communication is converted toUSBmethod.

    ORTEC USB MCAproductUSB-CONC CONNECTIONSdistance extender
    USBThe connection is withORTECDigital multi-channel buffer (MCB) or multi-channel analyzer (MCA) products (such asdigiDART、digiBASEandDSPECseries) a quick way to communicate.USBis to connect the instrument toPC(especially portable laptops). However, there are situations where one or more instruments need to be connected over long distances beyondUSBThe distance an extension cord can reach.USB-CONCis a "USBto Ethernet hub", you can use Ethernet hardware andTCP/IPThe agreement will be up to5aORTEC MCBConnect toPC. multipleUSB-CONCThe device can be connected to a singlePCorPCnetwork.

    USBEXT USBActive extension cord
    ModelUSBEXTCan buffer extension cords in and outUSBsignal to ensure signal quality. low speed and high speedUSBAll devices can be usedUSBEXT. No additional power required (extension cord is provided byUSBpower supply).

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.