Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
31 products
View product
Product model: Brief description: The German IBA CR/DR detection phantom DIGI-13 is used for quality inspection of CR and DR imaging systems (including uniformity, spatial resolution, low contrast resolution, visible light field and X-ray field calibration and artifacts, etc.) according to DIN6868-13 standard.
View product
Product model: Brief description: Used for quality inspection of all types of CR and DR imaging systems. The following parameters can be detected simultaneously: spatial resolution, low contrast resolution, dynamic range, light field and illumination field consistency, and spatial distance accuracy.
View product
Product model: Brief description: Multifunctional image quality detection phantom is used for CRDR low-density resolution, spatial resolution, radiation field and light field consistency, and uniformity detection.
View product
Product model: Brief description: According to DIN 6868-13 standard, used for quality inspection of CR and DR imaging systems (including uniformity, spatial resolution, low contrast resolution, calibration and artifacts of visible light fields and X-ray fields, etc.).
View product
Product model: Brief description: Used for filming, digital X-ray imaging systems and fluoroscopy system inspections. It can detect items such as light field/radiation field consistency, spatial resolution, low contrast resolution, dynamic range and image consistency.
View product
Product model: Brief description: Used for filming, digital X-ray imaging systems and fluoroscopy system inspections. It can detect items such as light field/radiation field consistency, spatial resolution, low contrast resolution, dynamic range and image consistency.
View product
Product model: Brief description: The NY-405RF low-contrast detail detection phantom can redefine the details and contrast observed by radiologists. It can be used throughout the entire range of radiological diagnostic imaging systems, such as fluoroscopy and angiography. It has 225 holes that create subtle contrast changes.
View product
Product model: Brief description: DRLRIEC-18 low contrast detail inspection phantom • DRLRIEC-18 meets WS 521-2017 "Specification for quality control inspection using digital radiography (DR) systems" Appendix B.1 IEC low contrast phantom requirements • 40mm organic glass (PMMA) module
View product
Product model: Brief description: Low contrast phantom. This phantom consists of a set of aluminum circular disks with a diameter of 1cm (21 circular holes in total). If used, block attenuation phantoms provide X-ray attenuation and hardening under automatic exposure control, allowing these disks to produce X-ray radiation contrast varying from 0.8% to 20%.
View product
Product model: Brief description: Low contrast test card, the test card is made of 20mm thick aluminum plate. Lcm aperture round holes are evenly distributed on the aluminum plate. The depth of the holes (mm) and contrast (value in brackets 96) vary from 0.07mm (03596) to 32mm (16%), a total of 19 round holes.
View product
Product model: Brief description: 19-hole low-contrast detail detection phantom KR0011. Used for low-contrast detail resolution detection of CR and DR imaging systems. 2. Diameter 100mm, 20mm thick; 19 round holes with 1cm diameter evenly distributed on the aluminum plate.
