KARRAY / PRODUCT DETAILS

4002A 96-W power supply for NIM chassis

Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management

4002A 96-W power supply for NIM chassis image

4002A 96-W power supply for NIM chassis

Product model:

Brief description:12V@2A and 24V@1.0A regulated DC power

  • Manufacturer strength

    Manufacturer Strength
  • Valid warranty

    Valid Warranty
  • Quality assurance

    Quality Assurance

Products

PRODUCT CATEGORY

Detailed introduction

ORTEC 4002A 96 Watt Power Supply for Nuclear Instrument Module NIM Bins
  • Regulated DC power of ±12 V @ 2A and ±24 V @ 1.0 A; 117 V AC @ 0.4 A
  • DC output is 96 W at 50°C,
  • Short circuit and overload protection
  • Available with 100, 120, 220 or 240 V AC from 47 to 63 Hz
  • Connects to 4001A or 4001C NIM chassis

The ORTEC Model 4002A power supply is designed to provide DC power to NIM chassis and is suitable for applications requiring ±12 V and ±24 V power supplies.
  • information +

    • Download link 4002A Brochure
    • Download link 4002A Brochure (A4)
    • Download link 4002A Manual
  • More information +


    The 4002A power supply can be purchased separately for use with existing NIM chassis or ordered with the 4001A NIM chassis or 4001C NIM chassis. The Type 4002A power supply is compatible with all ORTEC NIM enclosures and with most standard NIM enclosures from other manufacturers. The 4002A power supply is designed to exceed the Class 1 power supply specifications defined in DOE/ER-0457T.

    The regulated DC power ratings provided by the 4002A to the attached chassis are +12 V @ 2 A, -12 V @ 2 A, +24 V @ 1 A, and -24 V @ 1 A. Output power is 96 W at ambient temperatures up to 50°C. Additionally, 117 V AC is available up to 0.43 A.

    There are several ways to prevent overloading. When the heat sink temperature exceeds 82°C, a red warning light on the connection chassis control panel will illuminate. When the radiator temperature exceeds 95°C, the power will automatically turn off and the power and temperature indicators will go out. Thermal overload will automatically recover when the thermal load is reduced. The foldback circuit limits the output current of the DC power supply to 120% of its rating. This provides overload and short circuit protection. The fuse protects the AC input of the power supply.

    The 4002A power supply is internationally available and can accept 100, 120, 220 or 240 V AC input voltage in the frequency range 47-63 Hz. The connector module on the rear of the 4002A is used to select the desired voltage range. The connector module also serves as a fuse box and power cord connector. The international standard IEC power connector (CEE-22) allows the use of power cords and plugs that comply with local electrical standards. The main power supply is controlled through the switch on the NIM chassis control panel.

    The power and control lines of the NIM chassis are connected through the standard interface connector specified in DOE/ER-0457T. The method of mechanically mounting the power supply to the chassis is using standard bolts specified in DOE/ER-0457T.

  • Specifications +


    Input

    Nominal voltage (AC)

    Stable voltage range (V AC)

    100

    120

    220

    240

    88-110
    103-129
    191-239
    206-258

    • frequency range47-63 Hz。
    • 120 V ACThe input current is at96 Wload(43% efficiency) is usually1.8 A rms。

    DC output

    2 Awith+12 V,2 Awith-12 V,1 Awith+ 24 V,1 Awith-24 V。+50°CThe output power under96 W. in+60°Cderated to72 W。

    117Volts AC output

    Use100or120 V AC, power fuse. in use220or240 V ACWhen, the output is96 WThe limit under load is50 VA。

    Adjustment rate

    passing by60After minutes of warm-up, at constant ambient temperature24hours, at zero to full load and the input voltage is88% to110% within the combined range of rated input<±0.05%。

    instability

    passing by24After hours of warm-up, at constant line, load and ambient temperature6within months<±0.3%。

    Output impedance

    In Gundam100 kHzat the frequency<0.3 Ω。

    temperature coefficient

    in0Arrive60Between ℃,<0.01%/°C。

    Noise and ripple

    in50-MHzBandwidth Peak-to-Peak Observed on Oscilloscope<3 mV。

    Voltage adjustment

    ± of minimum range0.5%; readjustability is ± of the supply voltage0.05% (usually ±1 V)。

    recovery time

    For rated input voltage and load current from full load10% to100% change for return to rated voltage ±0.1% time required within range<50 μs。

    circuit protection

    Protect the input power cord with a fuse. If the temperature exceeds safety limits, power is automatically cut off by an internal switch. When the load is removed, the output current foldback limit will automatically resume.































    Dimensions and weight

    Size

    Weight (approximate)

    Model

    height

    Width

    Depth

    shipment

    Net weight

    4002APower supply (±12 V,±24 V)

    8.6 cm
    3-3/8
    inches

    42.9 cm

    16-7/8inches

    14.0 cm

    5-1/2inches

    10.0 kg

    22pounds

    6.8 kg

    15pounds

    4001A/4002A(Already assembled)

    22.2 cm
    8-3/4
    inches

    48.3 cm

    19inches

    40.6 cm

    16inches

    15.9 kg

    34pounds

    11.8 kg

    26pounds


  • Ordering information +


    Model

    Description

    4001A/4002A

    NIMchassis and96WPower supply (±12V,±24V)

    4002A

    96-WPower supply (±12 V,±24 V)

Product consultation

Message box

Please enter the calculation result, such as: three plus four = 7

After submission, we will receive your requirements. You can also download the requirement file or call 021-20989890 directly.