Survive in development, continuously optimize, and promote rapid development of enterprises with good reputation and scientific management
806 products
View product
Product Model: Brief Description: For adjusting the delay and width of coincidence and gate pulses Eight independent channels TTL output and NIM standard fast negative output in a compact package design Output delay is independently adjustable from 70ns to 10s Output width is independently adjustable from 70ns to 10s The ORTECGG8020 eight-channel gate pulse and delay generator is a compact and versatile solution
View product
Product Model: Brief Description: Fast timing discriminator capable of counting narrow pulses at very high count rates, and/or accurately marking the arrival times of these same pulses
View product
Product model: Brief description: Good time resolution over a wide pulse amplitude range with scintillation and semiconductor detectors 50MHz count rate capability 5mV minimum threshold Within 100:1 dynamic range
View product
Product model: Brief description: Suitable for microchannel plate detectors, microchannel plate photomultiplier tubes, channel multipliers, fast silicon photodiodes and fast photomultiplier tubes. Accepts input pulses with widths from 400ps to 5ns and amplitudes from -50mV to -5V.
View product
Product model: Brief description: Quickly and easily calibrate time-to-amplitude converters. Accuracy of 10ps in a 10ns period. Long-term stability, 100ppm/year. Calibrate in the range of 80ns to 80s for 10ns to 10s time periods. The ORTEC462 time calibrator is often used to quickly and easily calibrate timing equipment (such as time-to-amplitude converters).
View product
Product model: Brief description: Two independent bias supplies in a single module
View product
Product Model: Brief Description: For silicon surface barrier detectors 0 to 1kV Two independently adjustable outputs 1.3M output impedance Current monitoring capability Precision dial ORTEC Model 428 detector bias supply provides bias voltage of any polarity to two semiconductor detectors, the current in each detector can be monitored externally through the front panel jack
View product
Product Model: Brief Description: Full-featured digital MCA and gain stabilizer for stability Fast data acquisition enables fine-tuned time resolution in throughput list mode Simplified multi-detector arrays via USB interface 0 to +1200-V detector bias voltage Includes MAESTRO advanced MCA software
View product
Product Model: Brief Description: CONNECTIONS Programmer's Toolkit provides interface modules and instructions to easily control ORTEC hardware devices from your custom Windows application
View product
Product model: KR5200 Brief description: The KR5200 online radiation alarm is used for monitoring radiation/ray/radioactive places. By measuring the radiation dose rate, it reminds workers that the radioactive source or ray device is in working or leaking state, so as to protect them from radiation hazards. It adopts a specially designed preamplifier circuit and has the characteristics of high sensitivity, easy operation, automatic display, data storage and over-threshold alarm, and can give the X-γ radiation dose rate in real time.
View product
Product model: KR-GEM-S7030-LB-C Brief description: High-purity germanium detector system GEM-S7030-LB-C Energy range: 3keV~3MeV Crystal size: direct ≥ 68mm, thickness ≥ 30mm End window diameter: 83mm Relative efficiency: ≥ 28% (typical value) Peak-to-Camera ratio: 40: 1 Energy resolution: ≤ 0.45KeV @5.9KeV; ≤0.55KeV @14.4KeV; ≤0.7KeV@122KeV; ≤1.9KeV@1.332MeV Peak shape ratio (typical value): FW.1M/FWHM
View product
Product model: Brief description: The spatial resolution test card (spatial resolution test phantom) is a tool specially used to test and evaluate the spatial resolution of imaging equipment, such as CT, MRI, etc.
View product
Product model: Brief description: The light field irradiation field detection board (light field irradiation field consistency detection board) is a tool used to detect the irradiation field consistency of radiation sources such as X-rays or gamma rays.
View product
Product model: Brief description: CT dose detection phantom is a special device used to measure and evaluate the radiation dose received by patients in CT scans. It usually consists of one or more objects that simulate human tissue that can be placed in the area being scanned to simulate actual human tissue.
View product
Product model: Brief description: The tissue equivalent solid water phantom is a new type of phantom that can replace the traditional water tank for routine detection of linear accelerator photon beams. The phantom is fast and easy, and each product is tested for water equivalence in an independent calibration laboratory before being put into use.
View product
Product model: Brief description: The low-contrast detection phantom is a tool specifically used to test the imaging quality of medical imaging equipment. It is mainly used to evaluate and improve the performance of X-ray radiography systems, CR systems and other equipment.
View product
Product model: Brief description: The simulation phantom can simulate natural bones and soft tissues, and can simulate human chest tissue, including thoracic vertebrae, opposite ribs, sternum and other structures. Mainly used for medical imaging quality evaluation and teaching/training.
View product
Product model: Brief description: The solid water phantom (radiation therapy dose verification phantom) is an important tool that helps radiation therapists ensure that patients receive accurate doses, thereby improving treatment effectiveness and reducing the risk of side effects.
View product
Product model: Brief description: The main function of the thermoluminescence personal dosimeter is to help people understand the radiation dose they have received so that they can take corresponding protective measures.
View product
Product model: Brief description: The main function of the X-ray machine comprehensive tester is to ensure that the radiation dose received by the patient is within a safe range during CT scanning to avoid damage to the patient's health. In addition, CT dosimeters can also be used to evaluate the radiation dose under different scanning parameters, helping doctors choose the best scanning plan, improving diagnostic accuracy while reducing radiation dose.
